1010 Fuel Gas Control Valve or Low Pressure Motor

This valve is used as a fuel gas control valve to feed the pilot on heated separators, treaters, and other similar liquid accumulators, as well as a low pressure, low volume dump valve on oil and gas production separators, compressors, or any type of liquid accumulator.

• WCB Body and Housing
• Minimum Maintenance, Easy Access: All Internal Parts Can Be Removed without Taking Valve Out of Line.
• Positive Shut-Off
• Optional Seat: Integral or Removable
• Optional Topworks: Direct, Indirect, Adjustable Single-Acting or Double-Acting

• Size: 1″ NPT Threaded
• Working Pressure: 300 psi
• Temperature: 180˚ F Std., Avail. to 400˚ F
• Seals: Buna-N Std.
• Diaphragm to Seat Ratio: From 18:1 to 7:1

(Cv) Flow Coefficient

• Integral Seat: 5.0
• Removable: 2.8
• Spring Adjustment: 5-80 psi Back Pressure

Body:

• Integral Seat: WCB
• Removable Seat: WCB
• Diaphragm: Buna-N
• Stem: 303 S.S.
• Spring: Stainless Steel